Is the room clean and free of dust and debris?
The use of a Shop Vac with an exhaust hose out side the room to be installed is best for cleaning. Be sure to keep dust, dirt or foreign particles away from the Uniclic Plank . The cleaner the Uniclic Vinyl Plank remains, the better the bond between planks.
What is the temperature of room?
Designer's Choice Flooring and subfloor room temperature should be between 65° and 85 ° Fahrenheit. Maintain proper temperature for 48 hours before and after installation. The building’s heating and airconditioning system should be turned on at least one week before installation.

Condition Designer's Choice prior to installation, the luxury vinyl plank must be stored at room temperature of at least 65 degrees Fahrenheit. For 24 to 48 hours before installation. Don’t remove planks from carton

What makes Designer's Choice so unique & revolutionary?
No messy adhesives or glue is necessary. Because of the planks flexibility the planks can be installed over existing floors such as natural wood, concrete, vinyl, linoleum, and even ceramic. Desiner's choice looks and feels like wood yet it is water resistant so it can be installed in moisture prone areas that traditionally have been “off limits” for traditional wood flooring and laminate products, like basements and bathrooms. Must refer to” Subfloor Preparation” on the following page for specific instructions.
Each LVT plank secures to each other not your sub-floor, using the revolutionary UniClic System. It’s free floating. To cut a plank, simply score and snap. No underlayment is necessary
1. Tools needed: Utility knife & straight edge,
2. Material Needed: Measure the length & width of your room. If the room has alcoves or offsets, measure these separately. This will give you the square footage of the room. Have a minimum of 10% extra to cover mistakes, trimming and for future needs and or replacement.